The New Year's Eve is approaching, and it is a cold winter, and the maintenance of the lifting platform cannot be relaxed, because this is the prerequisite to guarantee its normal use. Only by doing good maintenance can it make it more vigorous and efficient in the new year. 1. Regularly clean up the countertop to prevent the countertop from rusting, so that the lifting platform has potential safety hazards. 2. The lubrication of the gearbox, gearbox, external meshing gear and other parts and hydraulic oil are carried out according to the requirements in the lubrication table. 3. Pay attention to check whether there are broken wires and loose strands in the wire ropes. If it exceeds relevant regulations, it must be replaced immediately. The maintenance of the wire rope should strictly follow the regulations of GB5144-85. 4. Frequently check the connection of each part of the lifting platform, and tighten it if there is any looseness. The body connecting bolts should be checked for tightness when the body is under pressure (the method of rotating the arm can be used to create the compressed state), all connecting shafts must have cotter pins, and they need to be fully opened. 5. The brakes of the various mechanisms of the lifting platform should be checked frequently and the gap between the brake shoe and the brake wheel should be adjusted to ensure flexibility and reliability. There should be no dirt on the wiping surface. When there is dirt, it must be washed off with gasoline or thinner. 6. When installing, disassembling and adjusting the slewing mechanism, pay attention to ensure that the center line of the slewing mechanism reducer is parallel to the center line of the gear, and the meshing surface is not less than 70%, and the meshing gap should be suitable. 7. All control boxes, electrical boxes, etc. are always kept clean, and dust on electrical equipment is cleaned in time. 8. When the motor of the lithium pallet truck
platform is overheated, stop in time, and continue to run after troubleshooting. The motor bearing should be lubricated well. 9. The contact surface of each part of the brush should be kept clean, and the pressure of the brush should be adjusted so that the contact area is not less than 50%. 10. Always check all wires and cables for damage. Bandage and replace the damaged part in time. 11. Frequently check whether each mechanism is operating normally and whether there is noise. If any malfunction is found, it must be eliminated in time. 12. Do a good job of cutting off the power. When the equipment is not in use, disconnect all power sources to prevent damage to the equipment due to thunderstorms. There are many maintenance methods for the lithium pallet truck platform. I hope you can do the above points and do the maintenance work so that the lifting platform can better serve everyone.
Look at the trends, both economic and consumer, for indications on your Ningbo Staxx Material Handling Equipment Co.,Ltd.'s staying power.
Ningbo Staxx Material Handling Equipment Co.,Ltd. aims to bring quality products of to our customers at affordable prices. We also take pride in offering first-class customer services. You can contact us, no matter what you want to ask us, we will do our best to help you. Website -Staxx Pallet Stackers
But we do think that reckoning with supply chains of pallet stacker truck
is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.
With innovative technology, our professionals can spend more time focused on strategies that will improve pallet stacker truck’s quality and deliver a more positive customers experience.