How to operate the electric stacker safely and standardizedly?

The electric stacker is an industrial vehicle powered by an electric motor and powered by a battery. It is used for loading and unloading, stacking and short-distance transportation of goods. It is popular in warehousing, logistics and other industries due to its advantages such as high cost performance, environmental protection, safety, simple operation, and easy maintenance. Now, all-electric stackers have been widely used around the world, with huge sales volume, and the demand for stacker drivers is also increasing. So, how to operate the electric stacker safely and standardizedly? Electric stacker manufacturers give these suggestions to drivers.

First of all, you must not drink alcohol before driving the electric stacker, wear safety protective equipment, and check all parts of the electric stacker, especially whether the safety device can operate normally and whether it is in good performance. When driving an electric stacker, try to avoid long-term and long-distance acceleration, and increase the speed steadily. When going down the slope, lightly step on the brake pedal, do not step on the bottom all at once, keep the stacker in the state of regenerative braking, and use the kinetic energy of the vehicle to reduce the power consumption of the battery. If you are driving at high speed, do not use emergency braking frequently. Electric stacker manufacturers remind that this is to avoid damage to the brake assembly and drive wheels, and to reduce the life of the electric stacker.

During the driving process of the electric stacker, the fork should be 10-20 cm above the ground. If you are driving on a place with poor road surface, it is best to reduce the load and driving speed of the stacker. After using the electric stacker, do not stop casually, be sure to check the condition of the battery and perform proper maintenance. It depends on whether the power of the battery is sufficient. If it is insufficient, it must be charged in time, but do not overcharge for a long time, so as not to damage the battery. It is also necessary to add water to the battery in time. The water here must use distilled water instead of drinking water, so as to avoid excessive impurities in the water and reduce the life of the battery. When the electric stacker is not in use, the fork should be lowered to the minimum to prevent the cylinder piston from being exposed to the air for a long time to rust. The electric stacker manufacturer reminds that after using the electric stacker, you must turn off the power at hand.

Although the stacker of the electric stacker manufacturer has the huge advantages of simple operation and safety, there are also many precautions in the driving process. Complying with the driving specifications of the electric stacker is not only to ensure the safe operation of the driver and improve work efficiency, but also to prolong the service life of the electric stacker, avoid problems with the components of the electric stacker, and reduce the cost of use.