How to use and maintain the battery of the walking electric pallet truck

Before starting the walking pallet truck for the first time, check whether the lithium battery in the electric pallet truck is fully charged. In order to meet the requirements of cargo handling, the battery of the walking electric pallet truck is not fully charged, and it must be fully charged after the first use.

Replace the lithium battery

When replacing a lithium battery for a walking electric pallet truck, only batteries with the same type and weight as the original battery can be replaced. Do not easily change the weight and size of the battery in the electric pallet truck, otherwise it will affect the center of gravity of the electric pallet truck body. If the net weight of the battery is too heavy or too light, it will affect the stability and braking ability of the walking electric pallet truck.

The battery has high voltage and energy. Be careful not to cause a short circuit and do not allow auxiliary tools to approach the poles of the battery to prevent sparks or short circuits. When maintaining and maintaining the walking electric pallet truck, the power supply should be disconnected.

Do not smoke or use open flames while charging.

To charge the battery of the walk-behind truck, be sure to use the original charger provided by the manufacturer, and be careful not to undercharge or overcharge, so as not to damage the lithium battery of the walk-behind truck.

When charging a walk-behind electric pallet truck, especially in an enclosed area, maintain good ventilation. During the charging process of the walking electric pallet truck, encountering water, open flame, electric spark, etc. may cause an explosion!

Therefore, before unplugging the power plug, the charging power of the walking electric pallet truck should be disconnected.

charging preparation

Be sure to charge the battery as soon as possible after using the walking electric pallet truck, and the storage time should not exceed 24 hours.

(1) After the walking electric pallet truck is parked, press the emergency stop power switch and remove the emergency stop switch key.

(2) Unplug the charging plug of the walking electric pallet truck and insert it into a suitable power supply (220V 50HZ).

(3) Turn on the AC power switch to start charging.

The above are all the basic maintenance knowledge of electric pallet trucks, and the details determine the cost. Only by persisting day and night will you see the effect of maintenance.