Precautions for the charging process of the 1.5 ton battery of the electric pallet truck

The 1.5-ton battery of the electric pallet truck cannot be completely discharged, and should be charged until the charger returns the charging completion signal. In fact, there are still many precautions related to battery charging of pallet trucks. Next, let's learn the relevant content together. So that we can avoid stepping on thunder when charging the device in the future.

Generally, the connection between the charger and the power supply is usually about 14 to 16 hours. After charging, the voltage of each single battery is about 2.7V, and the electrolyte density of each single battery will reach 1.27 ~ 1.29kg /1.25°C. It is suggested that you should charge the 1.5 ton electric pallet truck in time. You should not place the equipment for a long time. You should charge and maintain the equipment every short period of time. Don't be careless. The following are the important things to keep in mind during the charging process:

Invisible batteries are connected to an open flame to prevent the gas from causing explosion, causing fire, unnecessary economic losses and personal injury.

When charging, it should be in a well-ventilated environment. It is recommended to electric pallet lift truck the 1.5 ton top cover of the electric pallet truck, or take the battery out of the pallet truck.

Temporary wiring is not allowed.

Ensure that the insulator tightly wraps the charging cable to ensure the personal safety of the operator.

The surface of the 1.5 ton battery of the electric pallet truck should be kept clean, and the surface of the battery should be wiped with an antistatic rag.

Do not place tools or other metal objects on the battery.

When charging, the temperature of the electrolyte should not be higher than 45℃.

After charging the 1.5 ton electric pallet truck, check the electrolyte level to see if it is 15mm higher than the separator. Under normal circumstances, add distilled water once a week.

Avoid contact with the skin and acid. If it comes into contact with the skin, rinse with plenty of soapy water, or seek medical attention in time.

Used batteries should be disposed of according to local regulations.

I would like to talk about the conversion of the 1.5-ton battery of the electric pallet truck. We need to start from the following four aspects:

1) Remove the battery solid screws

p>

2) Remove the cable from the battery terminals.

3) Slide out or hang out the battery.

4) Install the 1.5 ton battery of the electric pallet truck according to the reverse process indicated below, and tighten and connect correctly.