The electric stacker needs to regularly check whether the connection of its charging circuit is good

Electric stacker has brought great convenience to handling and unloading. With the continuous development of our society, there are more and more places where electric stacker is needed. It has many advantages, good operability and good economic benefits. However, many people only care about the convenience brought by electric stackers and ignore their usual maintenance and maintenance, which is detrimental to their use effect, performance and lifespan. The following is about electric stackers. Some knowledge of pallet truck maintenance and repair.

1. Battery maintenance of electric handling stacker

Check whether the connection of the charging circuit is reliable, check whether the connection between the connection and the plug is in good condition; check the charger of the electric handling stacker Check whether the battery is in good condition, check whether the battery is seriously lacking liquid; check whether there is irreversible sulfation of the electrode plate.

2. The circuit part of the electric handling stacker

Do not use the electric handling stacker under voltage; do not use the electric handling stacker while charging; pay attention to rain protection.

3. The forks of the electric handling stacker have fixed pallet type and movable fork type

movable fork There is a spacer at the connection between the root and the electric handling stacker, and the height of the spacer is adjusted by screws to achieve the purpose of adjusting the height of the front section of the fork.

4. Oil leakage from electric handling stacker

Most of the oil leakage is at the connection between the oil pipe and the oil cylinder or pump station. Tighten the nut for a few more turns, but remember not to use too much force, otherwise it will lead to slippage. If it is confirmed that the nut has been tightened and the oil continues to leak, the nut needs to be disassembled, the gasket or explosion-proof valve should be replaced with the correct model or a new one, and then re-tightened. Generally, this fault can be solved. When removing the nut, the fork must be lowered to a very low level, so that all the hydraulic oil in the oil circuit has been returned to the cylinder of the pump station to avoid a large amount of leakage.

Everyone needs to pay attention to the maintenance of the battery when using the electric stacker. Usually, the charger should be unplugged in time after charging, which is good for its service life. Before use and in peacetime, you should also regularly check whether its circuit is in good condition. If there is any fault, it should be eliminated. If the electric stacker has oil leakage, it should be dealt with in time, otherwise the small problem may become a big problem, so it will not be worth the loss. .