The electric stacker will accelerate the wear of wearing parts during operation, so it needs regular maintenance.

With the development of the warehousing and logistics industry, electric stacker trucks play a role in the convenience of logistics transportation and stacking handling as a common cargo handling vehicle. The electric stacker uses the battery as the energy source and the motor as the starting device to operate, which can greatly improve the work efficiency, reduce the labor intensity of workers, and win the opportunity for enterprises to compete in the market. Therefore, many users have chosen to buy electric stacker trucks. However, there will be wearing parts when using the electric stacker. What are they? Let's take a look.

1. Wheels

The wheel material of lithium pallet truck can be divided into polyurethane wheel, nylon or wheel rubber; polyurethane wheel is widely used, Because it is safe and soft. Nylon wheels are used in manual stacker trucks or semi-electric stacker trucks because of their light weight and high stiffness. Rubber wheels are used for special needs of users. The wheel is the part of the electric stacker that touches the ground, and it is inevitable that there will be wear during the movement of the ground, so the general manufacturers sell the stacker without warranty.

2. Battery

The electric stacker is a transportation and handling equipment that stores energy through batteries and is driven by electricity. The battery is an important part of the electric stacker. At present, the batteries of electric stacker trucks are generally lead-acid battery packs; the chemical reaction inside the battery generally has an active cycle, and the general plastic shell start-up battery can only be used for 1-2 years. The battery pack can be charged and discharged 700 times in general, and it can be used for almost 3 years under normal conditions. In the later period of use, the maintenance of the battery is important.

3. Carbon brushes

The carbon brushes of the motor have always played a role in contact, but just like pencils, they are always worn, so it is an inevitable trend to wear them off. However, in general, the carbon brushes of the motor can be used for three to five years at a time.

4. Bearings

Most of the bearings are installed inside the wheels. When the wheels are replaced, the bearings will be scrapped. However, generally good bearings can be used for three to five years.

5. Oil seal

The oil seal generally acts on the piston rod of the hydraulic cylinder and acts as a seal. With the long-term friction of the piston rod, it is normal for the oil seal to wear off. Generally speaking, the oil seal is not guaranteed.

6. Plastic case

The damage to the plastic case is basically caused by human operation bumps and bumps, and the probability of this damage is relatively high, and manufacturers usually list it when selling For wearing parts, we do not provide three-guarantee service.

In general, the wearing parts of the all-electric stacker mainly refer to the devices that are easily damaged due to wear during operation. These damages are problems that cannot be solved at the technical level, so they are not within the scope of the manufacturer's three guarantees. In the process of use, understand some precautions for the use of electric stackers, and do a good job in the maintenance of electric stackers, which can also prolong the service life of wearing parts. The above is all the content, I hope reading it can be helpful to everyone.