4 possible faults of semi-electric stacker!

Because of its good economy, operability and convenience, electric handling stackers are engaged in the loading, unloading and transshipment of goods in some operating places that do not require high tonnage and height. Therefore, the use of electric handling stackers is becoming more and more common, but many customers do not pay attention to the maintenance of electric handling stackers in use, so electric handling stackers may often fail.

1 . Battery maintenance for electric handling stackers. Check whether the connection of the charging circuit is reliable, check whether the connection between the wiring and the plug is intact; check whether the charger of the electric handling stacker is intact, check whether the battery is seriously lacking in liquid; check whether there is irreversible sulfation of the pole plate.

2. The circuit part of the electric handling stacker. Do not use electric handling stacker under voltage; do not use electric handling stacker while charging; rainproof.

3. The forks of the electric handling stacker have fixed pallet type and movable fork type. There is a spacer at the connection between the root of the movable fork and the electric handling stacker, and the height of the spacer is adjusted by screws to achieve the purpose of adjusting the height of the front section of the fork.

4. The electric handling stacker leaks oil. Most of the oil leakage is at the connection between the oil pipe and the oil cylinder or the pump station. If it is confirmed that the nut has been tightened and the oil continues to leak, the nut needs to be disassembled, the gasket or explosion-proof valve should be replaced with the correct model or a new one, and then tightened again. Generally, the fault can be solved. When removing the nut, the fork must be lowered to the lowest level, so that all the hydraulic oil in the oil circuit has been returned to the cylinder of the pump station to avoid a large amount of leakage.