How to carry out the running-in period of the aerial work platform vehicle?

When we buy a new car, there will be a break-in period, which is very important for our future use. In fact, there will be problems during the running-in of the aerial work platform. So how do we run-in the aerial equipment during the running-in period? 　　1. Novice operation: 　　 Because novices don’t know much about aerial work platforms, simple operations may make mistakes. Lead to damage, and even cause mechanical accidents; therefore, operators in this area must study carefully and be trained before they can take up their posts. 2. Loose: 　　The parts of the new processing device have a few errors in shape and cooperation scale. In the early stage of use, they are affected by alternating loads such as impact and oscillation, as well as heat, deformation and other factors, plus excessive wear. For other reasons, simply loosen the originally fastened parts of the aerial platform stacker.　　3. Fast wear speed: Because the parts of the aerial platform stacker are processed and the elements of the device conflict, the appearance is rough, the contact area is small, and the load is uneven, the greater wear will occur. During the operation, the concave and convex parts of the parts conflict with each other, and the worn metal fragments also continue to participate in the conflict as abrasives, and the appearance of the parts wears faster. Therefore, during operation, it is easy to cause the wear of the components and the wear rate is fast. At this time, if the overload is running, it may cause damage to the parts and some problems. 4. Leakage phenomenon: 　　 due to the loosening, vibration of the parts of the aerial platform stacker and the influence of the heat of the machine, the sealing surface of the machine and the pipe joints, etc., will show leakage; some shortcomings such as casting and processing make it difficult to debug the device It was discovered, but due to the effects of vibration and impact during the operation, this shortcoming was exposed and manifested as leakage (seepage) of oil (water). 5. Improper use of lubricating oil: Inadequate maintenance of lubricating oil will also result in smaller cooperation gaps between parts, and lubricating oil is not easy to form a uniform oil film conflict on the surface, and because the device is difficult to ensure the uniformity of the mating gap, the smoothness is reduced. degree. High efficiency, resulting in abnormal wear and tear of the machine in the early stage. The conflict or interruption of the cooperation conflict leads to the onset of failure.
is emerging as one of the most popular pallet stacker truck, moving beyond its +pallet +jack +supplier benefits, with conclusive scientific evidence suggesting the positive role play in pallet trolley.
Ningbo Staxx Material Handling Equipment Co.,Ltd. are a market-focused, process-centered organization that develops and delivers innovative solutions to our customers, consistently outperforms our peers, produces predictable earnings for our customers, and provides a dynamic and challenging environment for our employees.
The only cardinal rule with adding animation is to keep high-quality on pallet stacker truck.