How to check the lack of power of the semi-electric stacker starter?

Semi-electric stackers are often used to move goods in warehouse logistics and have become a very popular industrial vehicle in recent years. However, there will always be some failures in the long-term use of mechanical equipment. For example, when the engine is running slowly and weakly, it cannot be started. Today, the manufacturer of semi-electric stackers will introduce you to the specific aspects of this problem.

Check 1: Whether the battery voltage is sufficient. Troubleshooting method: Charge the battery of the semi-electric stacker or replace it with a new one.

Check 2: Check whether the over-power of the motor is enough, whether the cable is hot, and check whether the copper ends of the cable are loose. Troubleshooting method: Compress the copper heads at both ends of the cable and replace the cable with a thicker cross-section.

Check 3: Whether the internal bearing of the engine motor is worn or too loose, and whether the rotor and stator are rubbed. Troubleshooting method: replace the bearing of the engine and increase the grease.

Check 4: Whether the carbon brush of the engine motor is worn too much, and whether the surface of the copper head of the rotor is ablated or dirty. Troubleshooting method: replace the carbon brush of the motor and clean the copper head of the rotor.

The power system of the semi-electric stacker is a relatively complex component. If you cannot determine the cause by yourself, you can contact the manufacturer to deal with it harmoniously.

The above is the method for checking the lack of power of the starter of the semi-electric stacker as explained by the manufacturer of the semi-electric stacker. If you encounter similar situations, you can refer to these Click the description, if you want to know more related questions, you are welcome to contact us.