Regarding mechanized construction enterprises, the profundity of engineering machinery skills is a direct element of the normal production of enterprises. Regarding the hydraulic high-altitude lithium pallet truck
platform, the normal operation of the hydraulic system is the primary sign of its outstanding skills. Qualified hydraulic oil is the guarantee for the reliable operation of the hydraulic system, and correct protection is the basis for the reliable operation of the hydraulic system. The hydraulic oil plays the role of transmitting pressure, smoothing, cooling and sealing in the hydraulic system. The improper selection of hydraulic oil is the primary reason for the early failure and durability of the hydraulic system. The hydraulic oil should be selected according to the random 'instruction' rules. When the special circumstances require use, the function of the oil should be the same as the original trademark. Hydraulic oils of different trademarks cannot be mixed to prevent chemical reactions and functional changes of hydraulic reactions. Dark brown, milky white, and odorous hydraulic oil is a metamorphic oil that cannot be used. Clean hydraulic oil is the life of the hydraulic system. There are many fine parts in the hydraulic system, some with damping holes, some with gaps, etc. If the solid impurities invade, it will cause strains, hairpins, blockage of the oil passages, etc., which will endanger the safe operation of hydraulic systems. Common ways for solid impurities to invade the hydraulic system are: hydraulic oil is dirty; refueling stuff is not clean; refueling and repairing, maintenance is not careful; hydraulic components desquamation and so on. It can prevent solid impurities from invading the system from the following aspects: It is necessary to filter and refuel the hydraulic oil. In order to increase the refueling speed, it is impossible to remove the filter at the outlet of the fuel tank. Fueling personnel should use clean gloves and work clothes to prevent solid impurities and fiber impurities from falling into the oil. Disassemble the hydraulic oil tank filler cap, filter cap, inspection hole, hydraulic tubing and other parts to avoid dust when the system oil passage is exposed. The disassembled parts must be completely cleaned before turning it over. For example, when disassembling the filler cap of the hydraulic fuel tank, first remove the dirt around the fuel tank cap, unscrew the fuel tank cap, remove the debris remaining in the joint (not flush with water to prevent water from entering the fuel tank), and open the fuel tank only after cleaning. cover. If you need to use scrubbing materials and hammers, you should choose scrubbing materials that do not remove fiber impurities and a special hammer with rubber attached to the striking surface. The hydraulic components and hydraulic hoses should be carefully cleaned, dried with high-pressure air and assembled. Use genuine filter elements with intact packaging (the inner packaging is damaged, although the filter element is intact, it may be unclean). Clean the filter together when changing the oil. Use scrubbing materials to carefully clean the bottom dirt in the filter housing before the equipment filter element. It is necessary to use hydraulic oil with the same brand as the cleaning oil used in the system. The oil temperature is between 45 and 80 degrees. The hydraulic system should be cleaned more than three times. After each cleaning, the system will be released when the oil is hot. After cleaning, clean the filter, replace the new filter element and participate in the new oil.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is one of the most-trusted manufacturing suppliers to the domestic markets.
Ningbo Staxx Material Handling Equipment Co.,Ltd. attaches great importance to customers and assists them in achieving their demands.
The rising +pallet +truck +manufacturer consciousness observed worldwide are expected to be key factors driving the demand for motorized pallet jack pallet stacker truck.