How to operate the electric pallet truck correctly? Are there any caveats?

The electric pallet truck adopts electric drive. Compared with the internal combustion pallet truck, the electric pallet truck has the advantages of no pollution, easy operation, energy saving and high efficiency. With the development of economy and the improvement of environmental protection and energy saving requirements, electric pallet trucks have developed rapidly. Market sales are increasing year by year. Especially in ports, warehousing, tobacco, food, textile and other industries, electric pallet trucks are gradually replacing internal combustion pallet trucks.

The correct operation of the electric pallet truck

Before the operation of the electric pallet truck, the appearance, power, lubricating oil and cooling water of the pallet truck should be checked. Check whether the lights and audio signals of the electric pallet truck are complete and effective. When the pallet truck is started, maintain a proper starting speed and should not be too violent. Pay attention to observe the voltage of the voltmeter of the electric pallet truck. If the voltage of the pallet truck is lower than the limit voltage, the pallet truck should stop running immediately. During the walking process of the electric pallet truck, it is not allowed to turn the direction switch to change the front driving direction to prevent the electrical components from being burned and the gears being damaged. It is not advisable to drive and electric pallet lift truck the electric pallet truck at the same time. Pay attention to the drive system of the pallet truck and whether the sound of the steering system is normal. If abnormal sounds are found, troubleshoot the fault in time. It is strictly forbidden to operate the pallet truck with illness. Slow down in advance when changing pallet trucks. Do not raise the forks too high while driving. When entering and leaving the job site or while driving, be careful that there are no obstacles in the sky. When the electric pallet truck is running, if the fork is raised too high, the height of the overall center of gravity of the pallet truck will be increased, which will affect the stability of the pallet truck. After the electric pallet truck is unloaded, the fork should be lowered to the normal driving position before driving. When the pallet truck pallet stacker the goods, the distance between the two forks should be adjusted as needed to make the load of the two forks evenly balanced. Regulation.

Precautions for electric pallet trucks

1. Before lifting, you must know the weight of the goods, and the weight of the goods must not exceed the rated load of the electric pallet trucks. weight.

2. When the electric pallet truck lifts and packs the goods, attention should be paid to whether the packing of the goods is firm.

3. According to the size of the goods, adjust the distance between the forks of the electric pallet truck so that the goods are evenly distributed between the two forks of the electric pallet truck to avoid partial load.

4. When the fork of the electric pallet truck is inserted into the stack, the gantry should be tilted forward, and after the goods are loaded into the fork, the gantry should be tilted backward, so that the goods are close to the fork wall, and as far as possible The cargo is lowered before driving.

5. The electric pallet truck should generally be in a vertical position when lifting and lowering the goods.

6. During manual loading and unloading of electric pallet trucks, hand brakes must be used to stabilize the forks.

7. The walking and lifting of the electric pallet truck are not allowed to operate at the same time.

8. Pay attention to the firmness of the goods on the forks when the electric pallet truck carries goods on the road with a large slope.