How to properly use and maintain the battery of the semi-electric stacker?

Semi-electric stacker is a manual push-pull walk, which can be raised and lowered electrically. Semi-electric pallet trucks are suitable for short-distance transportation in factories, warehouses, logistics and other enterprises and loading and unloading in areas with low workload. The maintenance of the semi-electric stacker is relatively simple. Maintenance of critical battery components is a top priority. How to charge the battery of the semi-electric stacker? We understand from the following points.

1. The charging environment of the semi-electric hydraulic pallet truck should be clean and ventilated. If conditions permit, the battery can be removed or the cover of the semi-electric stacker can be opened;

2. The semi-electric stacker The electrolyte level of the high car should be 15mm higher than the separator. Below this mark, the electrolyte should be replenished in time to prevent the battery from losing power and affecting the life of the light battery - semi-electric stacker. In addition, the temperature of the electrolyte should not be higher than 45 degrees during charging;

3. Do not expose the semi-electric stacker to an open flame when charging, because the battery will generate a large amount of flammable gas during charging, so Prevent the semi-electric pallet jack from catching fire during charging. The charging process;

4. The semi-electric stacker should avoid skin and acid contact during the charging process. If there is contact, please use a lot of soapy water or consult a doctor;

5. The battery should be kept clean and dry at ordinary times. It is not allowed to place other batteries on the battery of the semi-electric hydraulic pallet truck. Items;

6. The waste batteries of semi-electric stackers should be disposed of in accordance with the National Environmental Protection Law.

Semi-electric stackers can generally load 2 tons, and the load will decrease with the load curve when it exceeds 2 meters. After lifting 2 meters, it can carry 1-1.3 tons, and when it is lifted to 3 meters, it can carry only 800 kg. This is related to the load curve. The higher the height, the lower the load. More than 2 meters will appear 'loss of load' phenomenon.

The load curve change diagram produced by the semi-electric pallet truck manufacturer, this curve must be strictly followed when stacking goods. Don't get away with it: it could, maybe nothing will happen! If it happened, the injury would be fatal. Therefore, the purchase of a semi-electric stacker must be determined according to the actual use situation! Then there is the choice of products that meet safety standards and have reliable after-sales service.