During the handling of electric forklifts, there are phenomena such as overloading, unbalanced loading and unloading of goods, and accidental falling of goods and injuring people. The possible reason is that the electric forklift lifts the load too fast during operation or the speed of the transfer exceeds the stipulation. At this time, the goods on the truck fall due to sudden braking and avoidance. It may also be that the goods are not tightly tied to the vehicle body according to the regulations or the goods are not matched with the fork arms of the electric forklift, etc., which cause the goods to fall from the fork frame. As a non-human handling tool for warehousing goods, electric forklifts are widely used in major workshops, transportation hubs, and transfer centers. Due to the large amount of electric forklift operations, it is necessary to pay attention to the following operational risks to avoid and master the solutions. Operational risk 1: The phenomenon of overloading, shaking and unbalance of loading and unloading items, and accidental falling of goods and hurting people during the handling of electric forklifts. The possible reason is that the electric forklift lifts the load too fast during operation or the speed of the transfer exceeds the stipulation. At this time, the goods on the truck fall due to sudden braking and avoidance. It may also be that the goods are not tightly tied to the vehicle body according to the regulations or the goods are not matched with the fork arms of the electric forklift, etc., which cause the goods to fall from the fork frame. This risk can be completely solved or avoided as far as possible according to the following points: When operating an electric forklift, it should be stable. Place the goods neatly and tie them tightly with the forks before transporting. When driving, don't make sudden brakes. For potholes, the road surface should be smoothed in time. At the same time, goods shall not be overloaded for loading and unloading in accordance with relevant procedures. Operational risk 2: Excessive load on the fork will cause the rear of the vehicle to tilt. At this time, the personnel are allowed to stand at one end of the electric forklift and use their weight as a counterweight. As a result, the rear of the vehicle suddenly tilts up when lifting the goods, causing the personnel to fall. This accident may be caused by overloading of the electric pallet truck
or the lack of protective measures for the standing position of the personnel. To avoid such accidents, the safety education of forklift operators should be strengthened. It is strictly forbidden to ride and stand on the electric forklift except the operator. And according to regulations, no overloading is allowed. Operation risk 3: The side of the electric forklift falls over while driving, causing damage to personnel and equipment. The reason may be that the electric forklift is driving diagonally or turning on a slope under load. Or the electric forklift is turning too fast. Therefore, the driver is required to drive at a low speed, avoid working with electric forklifts on soft ground, and at the same time avoid sudden braking when the load is on. Operational risk four When the electric pallet truck is reversing, the driver's vision is blocked or the driver's bad habits cause a bump accident. The possible cause is that the mirror and the reversing sound on the car are not installed as required or the fault has not been repaired. It may also be that the driver does not sound the whistle to remind people around when reversing. Therefore, the vehicle reversing warning component should be installed and repaired in time, and at the same time, the driver's safe reversing habit should be cultivated.
Nowadays, the adoption of pallet stacker truck
in hand pallet truck price industry is quite common.
We are proud to be one of the largest suppliers out there. You will love what we offer for your pallet stacker truck solution. Check our website at Staxx Pallet Stackers
or call to talk to our customer service department with any questions you may have.
According to the latest social survey, more than 50 percent of consumers (across all age demographics) follow a brand before purchasing a product. Therefore, Staxx's content can make or break a customer's decision to conduct business with you.
pallet stacker truck receives the updates through industry associations, internal legal counsel, regional associations and legal publications.