Take you to a correct view of electric pallet trucks and electric stackers

In use, electric pallets can effectively improve work efficiency and reduce business costs, as follows: 1. The cost of direct handling can be reduced by more than 25% compared with manual handling. 2. The cargo unit to be transported can be enlarged to save the time of transport. 3. Reduce the damage of the transported items and improve the success rate of the product. 4. Increase the height of the stack and improve the utilization of the stacking space. 5. Hydraulic pallet truck reduces labor intensity and improves working conditions. 6. Good maneuverability, diversified work performance, reduce other loading and unloading equipment, and reduce the investment of the entire handling facility. The electric stacker has good performance and can meet the needs of different industries, especially the needs of modern warehousing, logistics and transportation. There are many types of fully electric stackers. The common ones in the market are forward stackers, fork-leg pallet stackers, legless counterweight stackers, wide-leg stackers, electric picking trucks, and single-pillars. Type stacker, three-way stacker, side electric stacker, etc. The biggest feature of the forward-moving stacker is that the fork and the mast can move backward and forward for a distance of 550-650mm, which can reduce the length of the stacker by an appropriate amount, which can effectively reduce the requirements on the passage, and there is no front bottom leg with counterweight. Effectively expand its scope of use, but the price is relatively high. The fork-leg pallet stacker is suitable for international single-sided pallet or non-pallet loading and unloading of goods. It has a bottom leg in the front. It is the most commonly used stacker and is cheap. However, the stacker has a relatively low chassis and cannot work on uneven ground. The legless counterbalanced stacker has no front legs. In order to ensure the level of the shovel, it is necessary to add a counterweight. The fork can be tilted forward and backward in an appropriate amount. It has a wide range of applications, but the vehicle is too heavy and too long. The price is more expensive, and the requirements for the channel distance are relatively high. The inner width of the wide leg stacker is 550-680mm, and the wide leg can reach 1200-1500mm. It can load and unload double-sided pallets, but the length of the pallet is lower than the inner width. This stacker effectively solves the double-sided pallet. Or some special cargo requirements, but the area is large, it is not easy to turn, and the operation is not convenient. The electric picking truck can only carry goods within 200kg, and the weight of the goods is relatively low, but the truck has a large lifting height, so it is suitable for picking up goods in high-level warehouses. Because the operation of the vehicle is upgraded and controlled by a person standing on the fork lifting device, the safety design requirements of the vehicle are relatively high, and it also shows that the operation of the vehicle is complicated and the technical difficulty is relatively high. The car also has the advantage of convenient picking. The single-pillar stacker lifts the double-bar mast of the ordinary stacker into a single-pole electric pallet lift truck, which can achieve stable and uniform speed lifting without being restricted by the parallel of the two sides. Because it is a single pole lifting, the load capacity is reduced, and the lifting height is not high. The biggest advantage of the three-way stacker is that it can still be controlled freely in the 1.5-meter aisle space. For an ordinary all-electric stacker to operate well, the aisle space must be more than 2.3 meters, so the three-way stacker It is widely used in stacking operations in ultra-small passages and has very powerful functions, but the price is very expensive and difficult to control. The side electric stacker uses the side for loading and unloading operations, because its fork is installed on the side, which is mainly used in occasions where the passage is too small. Generally, side shift attachments are installed in the production process, but the normal production method It should be an integrated side-shift fork, which is very expensive, and the fork is installed on the side, which obviously reduces the moving performance of the lithium pallet truck, making the body very bulky.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is one of the world’s leading and most-trusted suppliers to the relevant markets.
Ningbo Staxx Material Handling Equipment Co.,Ltd. will make a healthy profit for its owners and provide a rewarding work environment for its employees.
Ningbo Staxx Material Handling Equipment Co.,Ltd.’s model also predicts (i) a positive effect of management on firm performance; (ii) a positive relationship between product market competition and average management quality (part of which stems from the larger covariance between management with firm size as competition strengthens); and (iii) a rise (fall) in the level (dispersion) of management with firm age.