The purchase of semi-electric stacker

In recent years, semi-electric stackers are very popular among many pallet truck equipment. They are simple in structure, easy to operate, economical and widely used. Today, the semi-electric stacker manufacturer will tell you how to choose a semi-electric stacker.

It will be very practical in some places where work is more frequent. Compared with manual lifting of the product, it will be more labor-saving and save a lot of time. The later maintenance is also very simple, as long as Open the back cover to see if the distilled water of the battery is at a certain level (that is to say, at least soak the power storage sheet inside the battery).

Because charging and discharging will have a direct impact on battery life, each semi-electric stacker is designed with an ammeter to indicate the power level. Charging and discharging can be indicated by green, yellow, and red ammeter. Usually, the battery of the machine can last for 4-5 hours when it is fully loaded. When the pointer of the ammeter points to the yellow mark, it means that it is about to be charged. (Note: It is recommended not to wait for the pointer to point to the red mark for charging, which will easily damage the battery.)

The manufacturer of the semi-electric stacker reminds: any stacker equipment There are load curve requirements, please operate in strict accordance with the instructions. The load curve means that an object will have different weight pressures after it leaves the ground. Many users think that they have bought a stacker with a load of 1 ton and a height of 3 meters, which means that a ton of goods is raised to a height of 3 meters. This is a misunderstanding. Usually there is a basic standard for the load curve, so everyone Take this factor into consideration when purchasing.

The above is the semi-electric stacker manufacturer's instructions on how to choose a semi-electric stacker. If you want to know more about the problem, you are welcome to contact us.