The semi-electric stacker manufacturer gives the operation instruction of the semi-electric stacker

Semi-electric stacker is an industrial vehicle with the advantages of energy saving, environmental protection and simple operation. Semi-electric stacker manufacturers believe that it is suitable for operations in narrow passages, such as: loading and unloading of goods, stacking of goods, and short-distance transportation.

I. Purpose and scope of use

1. The battery is used as the power source, the DC motor is driven, the oil pump is driven to supply pressure, and the walking is driven by human power;

2 . This truck is suitable for short-distance pallet transportation and stacking operations. The ground needs to be leveled. Now it is only allowed to work inside the warehouse;

Second, before use

1. Check whether the hydraulic pipeline leaks oil

2. Check whether each support wheel can work normally

3. Open the electric door lock and check the electric energy meter on the instrument panel. The battery has no electricity, it should be charged, and it is strictly prohibited to use it without electricity

4. Press the electric pallet lift truck and lower buttons to check whether the electric pallet lift truck and lower actions of the vehicle are normal

Three, the operation method

1. On the operation panel, look at the function key of each button.

2. Handling: the semi-electric stacker manufacturer prompts to pull the vehicle to the goods Near the pile (the head of the fork is about 300mm away from the pile), open the electric door lock, press the down button, and adjust the fork to an appropriate height; insert the fork into the pallet slowly and as deeply as possible, and press the up button to reach the The height of the fork is 300mm from the ground; pull the vehicle to the predetermined position, press the down button, after the pallet has completely landed, slowly pull out the fork, the fork is separated from the stack, and then slowly remove the vehicle; and press the up button to lift the fork up About 300mm off the ground.

3. Stacking height: The semi-electric stacker manufacturer prompts to open the electric door lock, and the same requirements as above, insert the fork into the pallet, press the up button to confirm that the cargo pallet is lifted (about 200mm) , and then slowly move the vehicle to the designated position; press the up or down button to raise or lower the tray to the specified height of the shelf (the bottom of the tray is about 200mm from the bottom of the shelf), then push the vehicle to send the tray into the shelf, press the down button, wait for Stop when the pallet completely falls on the shelf; move the vehicle and move the vehicle to the designated position after the fork has completely pulled out the pallet, and lower the fork to 300mm from the ground.

4. When the energy meter displays the first grid on the left, connect the special charger to charge, and the charging time is about 15 hours.

4. Precautions

1. It is strictly forbidden to press the up or down button when the vehicle is running;

2. It is strictly forbidden to switch the up or down button quickly and frequently;

3. It is strictly forbidden Quickly load heavy objects on the forks;

4. Overload use is not allowed

5. When using, make sure that the center of gravity of the goods is located at the center of gravity of the two forks

6. It is strictly forbidden to place the goods on the forks for a long time

7. It is strictly forbidden for any person or any part of the body to be placed under the forks and heavy objects.

The above are semi-electric The operation manual of the semi-electric stacker given by the stacker manufacturer, if you have more questions, you are welcome to consult us.