These several electric storage pallet truck cleaning methods are suitable!

Each enterprise will add relevant regulations and requirements for the cleaning and maintenance of electric storage pallet trucks in the pallet truck operating procedures, but the specific operation methods are not clear. There are often some mistakes in daily cleaning, such as washing directly with water. If the electric storage pallet jack is cleaned in this way, the pallet jack will be destroyed.

During the long-term use of the electric storage pallet truck, a large amount of dust and debris will accumulate, which will have a certain impact on the performance of the vehicle. It is still more important to clean the pallet truck regularly, and it must not be ignored during use.

Do not turn off the power when cleaning the pallet truck

After parking, replace the battery and clean it, and turn off the power when not operating the electric pallet truck . Otherwise, the pallet truck control switch may be triggered by mistake, resulting in an accident. It is also possible to short-circuit the positive and negative terminals of a battery or other electronic component while using a damp cloth or other metal tool. The battery voltage of the pallet truck itself exceeds the human body load, and there is a danger of electric shock.

1. The first is to clean the exterior of the electric pallet truck. Before cleaning, it is necessary to turn off various power sources of the vehicle to prevent electrical damage to the vehicle due to short circuits during the cleaning process.

2. The exterior of the pallet truck body can be wiped with a damp cloth.

Rinse directly with water

In order to save labor and time, the pallet truck driver showers the pallet truck with bottled water or a water pipe, or even directly with a high-pressure water gun rinse. The sealing effect of electric pallet jacks is no better than that of cars. Electric pallet jacks are designed for indoor operation and are not rain and water resistant. We all know that circuit components are afraid of water. After the electric pallet jack is washed with water, the water will flow under the base along the gap between the body and the pedals, causing damage to the circuit components.

First of all, there will be some 'soft faultsThen, the circuit components are damaged, the pallet truck is 'squattingBurning the pallet truck

3. When cleaning the voltage components of the electric pallet truck, compressed air can be used to blow off the dust on the voltage. It should be noted that the voltage components cannot be cleaned with a high-pressure water gun.

4. After the electric pallet truck is cleaned, check the parts or parts that need to be lubricated according to the lubrication parts, and add lubricating oil in time.

5. The battery of the electric stacker can be washed with water, but the water cannot enter the battery. Lift it out and wash it to prevent some parts of the pallet jack from getting into the water.

6. In order to maintain the flexible operation of the tires of the electric pallet truck, the attachments on the wheels and other parts must be removed in time after each transportation, so as not to affect the vehicle's performance. run.