Features and working environment of electro-hydraulic pallet truck

Jiangsu electric forklift manufacturer's 2-ton electric pallet forklift is suitable for pallet stacking and handling of goods, and the electro-hydraulic pallet truck is suitable for transporting goods. It has no mast lifting system and is used in scenes that only need to be transported without stacking. Pallet trucks are divided into three types: walking, standing and driving. The all-electric pallet stacker is suitable for the handling and stacking of light goods indoors. It has a small body, does not take up space, and has a wide range of applications. It can be used in multi-storey warehouses and warehouses with narrow spaces.

Jiangsu electric forklift manufacturer launched the electric forklift with a mast that can move forward, and the entire structure of the mast will move back and forth on the moving track at the bottom of the mast. When the fork arrives, the center of gravity of the cargo will fall within the four balance points formed by the wheels. The function of the electro-hydraulic pallet truck can meet the requirements of flexibility, stacking safety, and stability, and the load is usually 1—It is between 25 tons, but its structure is complex and the cost is high. It is suitable for places with narrow space and high lifting height requirements. It is often used in high-rise warehouses.

Jiangsu electric forklift manufacturer's electric forklift can also be used as a three-way adjustable fork for narrow shelf passages. Three-way rotation, the car body does not need to be turned when stacking, just turn the fork or mast, and the width of the aisle will be reduced, currently the aisle is below 18 meters. The channel width of the electro-hydraulic pallet truck also depends on the size of the pallet used. In order to ensure the stability of the lateral stacking, the weight of the whole machine is much larger than that of the three-point counterbalanced electric forklift, so the economy is not very ideal.

The four-way electric forklift of Jiangsu electric forklift manufacturer is basically the same in structure as the reach forklift, integrating the functions of the reach forklift, side fork, and counterbalanced forklift. The mast of the electro-hydraulic pallet truck is located between the front and rear wheels. The front of the forklift has two arms extending out like arms. There are support wheels in the front part of the forklift. When the forklift is unloading, the fork is stretched out, and after the fork unloads the goods, it returns to the middle position close to the car body, and its stability will be greatly improved.

Different from the electric forklift mentioned before, the two load-bearing wheels at the front end of the fork leg of the Jiangsu electric forklift manufacturer electric forklift can rotate 90 degrees through the steering mechanism.°, when the rear wheel turns 90°At this time, the electro-hydraulic pallet truck can change from the state of front and rear driving to left and right driving, so it is suitable for Changxing material handling in narrower passages. The channel width can usually be within 2 meters, and the cost will be relatively high due to the complex structure.