Fixed hydraulic lift installation environment

The driver of the lifting platform truck must follow the mechanical maintenance regulations and perform various inspections and maintenance before starting the lifting platform truck. Before work, check the working range of the lifting platform truck to remove obstacles that hinder the rotation and walking of the lifting platform truck.　　 Check all hydraulic pipes and joints. The pipes must not be damaged, the joints must not be loose, and all joints must be tightened. Remove and disassemble the lowering valve, blow the plunger clean with compressed air, then install it, and reinstall it.　　Fixed hydraulic electric pallet lift truck is suitable for installation and use under various environmental conditions indoors and outdoors. The lithium pallet truck platform can be installed in a closed hoistway or between open floors according to the requirements of use; it can be installed in a concave foundation pit or on a flat ground.　　 Scissor hydraulic lifting platform: The four lifting platforms are fixed in position, cannot be moved, and have poor flexibility. At the same time, an independent hydraulic pump station and a large number of hydraulic pipelines are required, which occupy space and are prone to oil leakage and pollute the working environment.
Normal inspection of fixed hydraulic lifting platform
Fixed hydraulic lifting platform: 1. Check whether the electrical equipment is normal before use. 2. All shaft oil holes must be lubricated before each use. 3. Before use, you must first electric pallet lift truck without load to check whether the hydraulic system is normal. 4. The load of the workbench should not be greater than the rated value, and it should not be shaken violently. 5. The eccentric load shall not be placed at any position other than 300mm around the workbench. 6. The hydraulic oil in the oil tank is replaced every 500 hours of work. 8. After the work is over, all parts should be scrubbed and cleaned. When not working, the workbench should be lowered to the lowest position to avoid rust on the surface of the piston rod. 9. In order to ensure the service life of the lifting platform, as far as possible, special personnel should be used for operation and storage. Any non-electric professional should not disassemble and assemble electrical appliances at will to prevent accidents. The lifting platform solves the lifting problem for you. If you have any consultation about lifting problems, you can call the sales department, we will send the technology to the door to measure, and then make a product quotation for you, and look forward to cooperating with you!
Clouds of hand pallet truck failures surround the world of +pallet +jack +supplier in particular, simply because people don’t pay as much attention to the pallet stacker truck as they should do.
Ningbo Staxx Material Handling Equipment Co.,Ltd. strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
For more pallet stacker truck hand pallet stacker reviews, tips and advice on choosing a washer and dryer for you and your family, please visit Staxx Pallet Stackers,where you can also choose the you are looking for.