How to charge the battery of the semi-electric stacker? What should be paid attention to?

Semi-electric stacker is a manual push-pull type that uses electricity to electric pallet lift truck. The semi-electric stacker is suitable for short-distance transportation in factories, warehouses, logistics and other industries and overloading and loading and unloading work in areas with little workload. The maintenance of the light semi-electric stacker is relatively simple, and the maintenance of the battery in the key components is the top priority. How to charge the battery of the light semi-electric stacker? I can understand by the following point of view.

1. The charging environment of the semi-electric stacker should be mainly clean and ventilated. When conditions permit, the battery can be taken out or the light-weight semi-electric stacker cover can be opened ;

2. The electrolyte level of the semi-electric stacker is 15mm higher than that of the separator. If it is lower than this mark, the electrolyte should be added in time to prevent the battery from running out of power and affecting the light-duty semi-electric stacker. The battery life of the high truck should not exceed 45 degrees;

3. The semi-electric stacker cannot be exposed to open flames during charging, because a large amount of flammable gas will be generated when the battery is charged, so the light-duty semi-electric stacker The stacker cannot be fireproof during the charging process;

4. The semi-electric stacker should avoid contact with the skin and acid during the charging process. In case of contact, use plenty of soapy water or consult a doctor;

5. Usually keep the battery clean and dry, and do not place other objects on the battery of the light semi-electric stacker ;

6. The waste batteries of semi-electric stackers should be disposed of in accordance with the National Environmental Protection Law.

Semi-electric stacker can generally carry 2 tons, and it will decrease with the load curve when it exceeds 2 meters. After raising 2 meters, the load is 1-1.3 tons, and it can only carry 800 kg when it is raised to 3 meters. This is related to the load curve. The higher the height, the lower the load. When the semi-electric stacker exceeds 2 meters, there will be a loss of load.

The semi-electric stacker has a load curve change chart provided by the manufacturer, which should be strictly followed when stacking goods. Never take a fluke: maybe, maybe, maybe, maybe nothing! Once it occurs, this injury can be fatal. Therefore, the purchase of light-duty stack-high vehicles must be determined according to the actual usage! Secondly, we must choose products that meet safety standards and businesses with reliable after-sales service.

.