How to deal with the failure of the pedestrian all-electric truck

The popularity of the use of all-electric walking trucks reflects our fast-paced life today, which not only saves manpower, but also improves the safety factor in the work process. But there will also be a series of problems, that is, equipment maintenance and troubleshooting. Let's talk about how to deal with the failure of the pedestrian all-electric truck.

The brakes of the pedestrian all-electric truck failed. In this case, it may be that the control circuit is not disconnected. At this time, a technician is required to check the control system. However, there is another possibility that everyone needs to pay attention, that is, the brake pads are severely worn and need to be replaced.

What if the all-electric hydraulic truck does not move at all? The suggestion I give here is to check whether the electric door lock of the all-electric pallet truck has been opened or broken, and then check whether the battery of the all-electric hydraulic pallet truck has electricity. If the battery is insufficient, arrange to charge it as soon as possible.

When the walking all-electric pallet truck cannot move forward or backward, it may be that the battery power is insufficient and it needs to be charged as much as possible; another possibility is that the walking control microswitch is loose , the screw needs to be tightened as soon as possible; there is another possibility that the DC contactor of the electric truck is out of order, and it is repaired and replaced; but it may also be because the electric control board of the all-electric hydraulic truck is damaged, it is recommended to check it first, and then repair and replace it; If the drive motor of the electric hydraulic truck fails, it will also be impossible to move forward or backward. The brake lock of the all-electric hydraulic truck will also occur, and the distance between the brake pads of the driving wheel needs to be adjusted.

What should I do if the battery of the walking all-electric truck is short-lived or cannot be charged? If this happens, it may be due to insufficient battery solution, which requires us to replenish distilled water or lead-acid water. If the battery is aging, please replace it with a new battery as soon as possible. If the power socket is in poor contact, please repair the contact surface as soon as possible, do not drag.

In addition, we would like to mention a situation, when the charger of the walking all-electric pallet truck does not work, there are two possibilities: one is that the charger does not work. Display content, the capacitor circuit breaker is blown; the other is that the power light of the charger is on, but the internal capacitor circuit breaker is open circuit or resistive circuit breaker, and the rectifier tube is damaged.

The above is what we talked about about how to deal with the failure of the pedestrian all-electric truck. If you have other questions, you are also welcome to contact us. For more exciting content, please continue to follow us.