How to operate a semi-electric stacker safely?

Semi-electric stacker is suitable for operations in narrow aisles and limited space. It is an ideal equipment for palletizing, high-efficiency loading and unloading in high-bay warehouses and workshops. Semi-electric stackers are light, fast, and easy to operate. Similar to the function of an all-electric stacker. It is very convenient to operate, so what should we pay attention to during the operation? Next, let the semi-electric stacker manufacturer introduce you how to operate it safely.

The semi-electric stacker manufacturer requires that the truck should be used in a flat and hard place, and the lubrication of each rotating part should be checked frequently. And the front view of the operator should be wide and high visibility, and there is enough space around the car to facilitate the work of the electric push car. If the volume of the loaded cargo is large and affects the operator's line of sight, the cargo should be behind and the operator will be in the front. The operating speed must match the surrounding environment. If the field of view is poor or there are pedestrians, it is necessary to slow down properly and use the horn if necessary.

When operating a semi-electric stacker, the operator must concentrate on the idea of u200bu200busing emergency braking, multiple starts and high-speed turns as little as possible to reduce vehicle damage and casualties. When driving, the fork should not be more than 150mm to 400mm from the ground.

When using a new car, carefully check the battery capacity. The purchased new car is due to transportation reasons. The power will not be less than about 80%, and the battery fluid needs to be replenished in time before use, and the battery pack can be safely used after being fully charged. To check whether there is any leakage at each oil pipe interface, check the capacity of the hydraulic oil in the oil tank, and replenish it in time. The semi-electric stacker manufacturer recommends to keep the electric control board assembly clean and tidy. In order to prevent the circuit damage caused by the unclean electric control board, blow it with high-pressure air or clean it with a brush every month, which is convenient for use.

The above is part of the safe operation process of the semi-electric stacker. If you want to know more about the safety process, please contact us in time! As a manufacturer of electric stackers Will provide you with professional services.