How to successfully complete the turning and turning operation of the electric truck

Many people think that the most difficult part of getting a driver's license is reversing the car into the warehouse, which requires comprehensive consideration of many aspects. In the process of driving an electric pallet truck, there is also a more difficult part, which is turning and turning. The inexperienced driver is in the process of turning. It is easy to fly out in the middle, and it will hit the wall in severe cases. The following is a summary of the driving method for the drivers, for reference only.

1. Correct turning skills of electric pallet trucks

When the driver turns the steering handle counterclockwise, the car will turn clockwise. When the steering handle is turned clockwise, the vehicle will turn counterclockwise.

When the truck turns, the first and most important task is to turn on the vehicle's indicator lights, honk the horn or look around, to inform nearby pedestrians or move the objects that obstruct driving. When there are no obstacles around and behind, also pay attention to whether the rear wheels and cargo will fall from the truck. When reversing on a curve, drive as close to the outer edge as possible to avoid scratching or pressing the line on the inner side.

Second, the correct turning skills of electric trucks

The electric pallet truck is different from the ordinary truck, its driving speed is fast, and the driving mechanism is installed at the rear of the car. When the driver controls the vehicle to turn, the swing of the rear part is relatively large, which is very easy to be out of control. Deviate from the correct route. Therefore, when the driver is about to turn, he needs to reduce the speed of the truck, grasp the steering handle, drive slowly, and turn slowly to avoid collision.

In addition, when turning a corner, you should also check whether there are pedestrians or vehicles in front of you.

It should be pointed out that the driver can perform a turning operation at any one, but turning is an operation that needs to be performed when encountering an intersection or corner. In fact, these two operations are not particularly difficult, and the driver masters need not worry too much.

In the process of selling electric trucks, the manufacturer will provide customers with the data of the turning radius, and the driver can refer to the turning radius to make the driving route.