Teach you how to replace the battery of the pallet truck

It is believed that the replacement of the battery of the electric hydraulic pallet truck is a very important thing for the user's experience. If it is not handled properly during the replacement process, there will be unexpected dangers. In different work scenarios, follow different rules and regulations, and operate according to the actual needs of the pallet truck manufacturers to ensure the safety of their employees. The same is true if the pallet truck battery needs to be replaced. Friends who don't know much about this aspect can learn it. Let's take a closer look below.

Set up a dedicated charging area for the electric hydraulic pallet truck

The working area and the charging area should be effectively isolated, so that the loss can be minimized in the case of electric leakage and fire, and the work The zone and charging station are made up of a few wires and a plate placed under the device, the fire extinguisher, eye wash basin and neutralization mechanism are necessary parts of the operation. The supporting facilities of the electric hydraulic pallet truck should be very careful to prevent the battery acid from splashing into the eyes of the employees, which is responsible for the personal safety of the employees. In addition, the retailer also reminds everyone that if the above situation occurs, rinse with warm water for at least five minutes, and then seek medical assistance.

Proper use of personal protective equipment

Personal protective equipment is also an essential part of battery maintenance for electric hydraulic pallet jacks. The operation is to require employees to wear rubber gloves and goggles, which will protect the skin and eyes from severe burns from corrosive battery acid. In addition, retail is calling on everyone to use aprons and clothing that covers all areas of the body to stay safe and secure. Because battery acid is volatile, it is recommended to use deionized water only near equipment as it can cause a pyrolysis reaction.

Ensure compliance with relevant guidelines

Relevant guidelines are strictly enforced. Smoking is prohibited near the electric hydraulic pallet truck charging station. Because hydrogen has potential interactions that could lead to an explosion. Support mandatory wearing of PPE and ensure that the operating area is well ventilated. In addition, it should be reminded not to wear jewelry such as necklaces to prevent the potential ignition of sparks and chemical fires. Adhering to the relevant guidelines not only reduces risk and fines, but also effectively facilitates safe battery replacement for pallet jacks.